PARKSAFE Wireless Front Parking Sensors

Wireless Reversing Sensors for Trucks -Trailers-Caravans-Motorhomes 

This kit includes:

4 x 22mm black plastic sensors with male RCA connectors

4 x Sensor cables with AV/RCA type plug-in joiners

1 x LCD colour display unit shows object distance and direction ,battery voltage and driving speed (GPS inside)

1 x Long Range Wireless transmission up to 30 metres from ECU to cabin -DC 10V-30V

1 x set of 4 heavy duty mounting brackets and mopunting screws (as shown)

> Battery voltage display

> Adjustable buzzer with volume control

> On/off service switch

> Optional rubber grommets are available for installing into metal bumpers

> 36 Months Warranty & Support

> Fast & easy installation in less than 1 hour

1. Mount the waterproof ecu/control module in a suitable protected location away from excessive heat 

2. Select and mark the most suitable position for installing the 22mm sensors  (as per the instructions) and drill the 8 holes for securing the sensor brackets 

3. After installing the 4 sensors, run the cables back to the control module and plug in taking note of the correct labelled positions.Then tidy up the excess wires with zip ties 

4. Connect the ground wire to the car body/chassis and the power wire to a switched accessory such as reversing lights or parking lights.

5. Move in to the cabin and find a suitable location for the display unit. First connect the ground wire to the car body/chassis and the power wire to a fused accessory line at the fuse box or behind the cigar lighter .

6. Finally for a clear understanding of how they operate  test the sensors are operation .